Atag WS6011MR, Instructions For Use Manual

Page: 71 / 90

GB 5
Attention!
Make sure the appliance is installed by an authorised installer
(see “Installation” chapter). Do not connect the appliance to the
flow network before completing the installation.
• Connect the appliance in accordance with the applicable
regulations in your area.
• We advise you to wear protective work gloves during the installation
of the cooker hood due to possible sharp edges.
• The appliance has been manufactured in accordance with the
latest safety standards. However we do advise that mentally
handicapped, disabled or retarded individuals do not use this
appliance without the proper supervision of a competent person.
The same applies to children.
• Never use the cooker hood when the grease filter has not been
properly installed!
• Do not lean against the cooker hood.
• The hood must never be used as a support surface unless
specifically indicated.
• Make sure there is sufficient circulation when you use the cooker
hood above a gas cooker.
• The exhaust exit must never be connected to a smoke duct which
is also used for other heating appliances.
• Never flambé under the cooker hood and always clean the filters
on time. Frying needs to be done under constant supervision to
prevent the heated fat from catching fire.
• The cooker hood needs to be cleaned regularly (at least once a
month) on the inside as well as on the outside. When the filters are
insufficiently cleaned or replaced, this will result in a fire hazard.
• If the connection cable becomes damaged, it should be replaced
by the manufacturer’s service department or by a person with
equivalent qualifications, in order to prevent dangerous situations
from arising.
• NB! Extended use can lead to condensation forming on the
extractor hood. This condensation can be removed easily with a dry
cloth.
SAFETY