GB 12
assembly
(continued)
Mount the hood on the fixing supports in the hood with the
bolts supplied M5 x 12 (2x), screwing the bolts in loosely (3).
Fit the adjustment bolts supplied M8 x 16 (2x) into the
welded-on nuts in the hood (4).
Level the hood front to back using the adjustment bolts.
Tighten the bolts M5 x 12 (2x) in the fixing support in the
hood. Then tighten the bolts M5 x 12 (2x) that have already
been fitted in the top of the hood (5).
Make the plug connections in the hood.
WG7
assembling the connecting bar
Through the opening of the left filter holder and the round
hole on the side of the suspension module, push the
connecting bar that comes from the knob into the hole in the
coupling plate (1) and secure with the rapid-fix nut (2).
adjusting the valve
If the knob for controlling the valve is in the closed position,
the valve in the pipe should completely seal off the hole
horizontally. If this is not the case, the valve can be adjusted
to the horizontal by moving the bracket in the direction of the
arrow (3).
3
4
2
5
1
2
3
700000929100 WG3_4_7_8B 26-05-2003 10:26 Pagina GB 12
