EN 35
FAULTS GAS
Symptom
Possible cause
Solution
Burner
extinguishes after
igniting.
The control knob has not
been depressed long or
deep enough (at least
3 seconds).
Thermocouple (2) is dirty.
Keep the control knob fully depressed for
at least 3 seconds between high and low
settings. This can take longer the first time
because of the gas supply.
Clean/dry thermocouple.
Ceramic glass
plate broken.
Object fallen onto it.
Close the gas main switch and pull the plug
out of the socket. Contact the your installer.
Please note! Do not throw a broken
ceramic glass plate in the glass recycling
bin but take this to the Municipality's
waste recycling centre.
Summary of Contents for IG9571MB
Page 38: ...NL 38...
Page 74: ...EN 38...