Atag HIDD28471SV Instructions For Use Manual Download Page 69 | Manualshive

Page: 69 / 78

background image

4. Use the available strain relief clamp to secure the cord.

5. Connect the wires of the cord to the window sensor in such a way the contact is open when the

window is closed (consult the instructions included with the window sensor).

Flush-mount installation into the worktop

Appliances without decorative frames are suitable for flush mounting.

brushed edge

decorative frame

Installing the appliance

The appliance may only be installed into a temperature- and water-resistant countertop, such as a
countertop made of (natural) stone (marble, granite), or solid wood (the edges along the cut-out
have to be sealed). When installing into a countertop made of ceramics, wood, or glass, a wooden
sub-frame should be used. The frame is not supplied with the appliance. The appliance may only
be installed into a countertop made of other materials after you have consulted the countertop
manufacturer and obtained his express approval. Internal dimension of the basic unit should be at
least equal to the internal cutout for the appliance. This will allow simple removal of the appliance
from the countertop. Attach sealing tape along the perimeter of the bottom of the glass panel.

Install the appliance (see ‘Installation’) and connect the appliance to the mains power supply (see
instructions for connecting the appliance). Test the operation of the appliance before applying the
seal. Seal the groove between the appliance and the kitchen worktop with a silicone sealant.
The silicone sealant used to seal the appliance must be temperature-resistant (to at least 160 °C).
Smooth out the silicone sealant using suitable tools. Observe the instructions for use of the selected
silicone sealant. Do not switch on the appliance until the silicone sealant has dried completely.

1. Silicone sealant, 2. Sealing tape

NOTE!

Pay particular attention to built-in dimensions with (natural) stone countertops. When choosing
the silicone sealant, observe the countertop material and consult the countertop manufacturer.
Use of inappropriate silicone sealants can result in permanent discolouration of some parts.

69

Installation

«
...
67
68
69
70
71
...
»

Summary of Contents for HIDD28471SV















































































Reviews:

No comments

Related manuals for HIDD28471SV

Brand: Rangemaster Pages: 20

Brand: mabe Pages: 44

Brand: ZANKER Pages: 32

Brand: IKEA Pages: 44

PKLL 751 T/IX/HA EE

Brand: Hotpoint Ariston Pages: 56

Brand: Electrolux Pages: 8

Brand: La Germania Pages: 41

Brand: Empava Pages: 21

Brand: NODOR Pages: 40

Brand: Wolf Pages: 74

Brand: Fagor Pages: 68

Brand: ROSIERES Pages: 12

Brand: ROSIERES Pages: 17

Brand: ROSIERES Pages: 16

Brand: Roshults Pages: 12

CPCGM 3F 3021 N

Brand: CORBERO Pages: 48

Brand: Fagor Pages: 48

Brand: Candy Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands