4. Set a higher or lower setting by sliding over the slide control with your finger or by tapping on
the slide control.
•
The cooking zones have 12 settings. There is also a ‘boost’ setting.
5. Remove the pan or touch the slider for 3 seconds to switch the cooking zone off.
NOTE!
When no cooking zone is active for 60 seconds, the cooking hob will power off.
Boost
You can use the ‘boost’ function for cooking at the highest power level during a short time (max
10 minutes). After the maximum boost time has passed, the power will be reduced to setting 12.
1. Place a pan on a cooking zone.
2. Touch level 12 of the slider or slide along level 12 to set the boost level. Touch level 12 twice if
'Auto Boost' is off (refer to chapter '
').
•
‘12’ and ‘boost’ appear in the display.
•
If 'Auto Boost' is active, boost is automatically activated when power level 12 is selected
(consult chapter 'Settings').
3. To deactivate the boost for the selected cooking zone, again touch level 12 on the slider.
NOTE!
To avoid overheating, the electronic control system may automatically deactivate boost prematurely
and decrease the power level to 12.
If there is no suitable pan on the cooking zone, the set level of temperature will flash. After one
minute, the cooking zone will be switched off.
28
Operation
