EN 29
Symptom
Possible cause
Solution
Fault code F00 / the red lamp
next to the child lock button
is illuminated and the lamp
above the pause button is
flashing.
The control panel is dirty or
has water on it.
Clean the control panel.
Fault code F0 ... F6 and FC.
Defective generator.
Contact the
service department.
Fault code F7.
The ambient temperature is
not good.
Switch off all heat sources
close to the hob.
Fault code F8 and F08 / the
red lamp next to the child
lock button is illuminated and
the lamp above the pause
button is flashing.
Appliance overheated.
Allow the appliance to cool
down and
start cooking once again.
Fault code F9 and/or
continuous
audible signal.
Voltage too high and/or not
connected properly.
Have your connection
changed.
Fault code F99 / the red lamp
next to the child lock button
is illuminated and the lamp
above the pause button is
flashing.
You have operated 2 or more
buttons
at the same time.
Do not operate more than
one button at the same time.
Fault code FA.
Mains voltage is too low.
Contact the
energy company.
Fault code FAN.
Air circulation not good.
Ensure that the ventilation
openings
below the hob are open.
Cooking zone does not
switch on automatically.
APd is switched off.
Switch on the APd function
Ticking sound when cooking.
APd is switched on (trying
to detect the presence of a
cooking pan)
Switch off the APd function
Other fault codes.
Defective generator.
Contact the
service department.
FAULTS
Summary of Contents for HI8471SVC
Page 63: ...EN 33...
