EN 13
Residual heat indicator
After a cooking zone has been used it may still remain hot for a while.
As long as the cooking zone is still hot an “H” will be visible in the
display.
Boost
You can use the ‘boost’ function to cook at the highest power level
during a short period of time (max.10 minutes). After the maximum
boost time the power will be reduced to setting 12.
Switching on boost
1. Put a pan on a cooking zone and switch the cooking zone on.
2. Tap twice with your finger at the end of the slide control to set the
‘boost’ setting.
Level 12 and ‘boost’ appear in the display.
Switching off ‘boost’
‘Boost’ has been switched on, the display shows level 12 and ‘boost’.
1. Tap any part of the slider with your finger.
In the display you will see a lower level.
Or:
2. Press the on/off button of the cooking zone you want to switch off.
You will hear a signal and the level in the display disappears. The
cooking zone has been switched off completely.
Power distribution of cooking zones
• Depending on the type of cooker, the cooking zones can affect
each other. When several cooking zones are switched on at the
same time, the power is shared automatically between them.
• When the maximum power of the combination of cooking levels
is reached during setting, one or more zones are automatically
reduced to the highest possible setting at that moment. This
is indicated by the flashing of the relevant control. The last set
cooking zone takes priority.
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
OPERATION
Summary of Contents for HI8471SVC
Page 63: ...EN 33...
