EN 13
Indications in the display
In display
Status
Power level ‘0’ for a cooking zone
Power level that is set for a cooking zone; 1 = low / 9 = high
Boost function active
No (suitable) pan on cooking zone (pan detection symbol)
Bridge cooking zones are connected (present depending on model).
Automatic heat-up function is activated
Grill function is activated (present depending on model)
Keep warm function is activated; maintain automatically at approximately 70°C
Pause function activated; the hob is in pause mode
Locking function is activated; the control panel is locked
Residual heat indicator; The hob has a residual heat indicator for each
cooking zone to show those which are still hot. Although the hob is switched
off, the indicator ‘H’ will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit.
Danger! Risk of burns.
Fault code; See chapter ‘Troubleshooting’
Timer use
The timer can be used in 3 different ways:
• As a minute minder (count-down timer)
— after the set time has elapsed, an alarm will
sound.
▷
The minute minder can be set for a maximum of 99 minutes.
▷
The minute minder can be used independently of whether the hob is operating.
▷
The minute minder can only be switched off or adjusted when the hob is switched on.
▷
Touch the timer key to stop the alarm.
• As a cooking timer
— the timer is connected to an active cooking zone. After the set time
has elapsed, the cooking zone will switch off automatically and an alarm will sound.
▷
A cooking timer can be set for each active cooking zone and can be set for a maximum
of 99 minutes.
▷
Touch the timer key to stop the alarm.
• As a cooking duration counter (count-up timer)
— shows the cooking time duration.
▷
The cooking duration counter is connected to a cooking zone.
USE
Summary of Contents for HI06471E
Page 63: ...EN 33 ...
