Atag BIH064 EV Series, Instructions For Use Manual

Page: 41 / 128

EN 11
Automatic connection of bridge induction cooking zones
This connection is made automatically:
• when you switch on the hob and there is already cookware on the bridge induction cooking
zones;
• when you put cookware (for instance a grill plate) on the bridge induction cooking zones
when the hob is switched on.
A connection symbol appears on the rear cooking zone.
Grill plates
The hob has a Grill function (depending on the model) for using a grill plate. The function keeps
the grill plate at an ideal temperature for grilling.
Power level setting
The cooking zones have 9 levels. Beside it there is a level ‘boost’ (P). If you have switched on
the hob the required cooking zone can be chosen within the next 5 seconds. Set the power level
by touching the slide control. At the first touch, the level is set according to the part of the slide
control that you touch. By sliding along the control, the power level setting is changing.
By sliding to the right, the level increases, while sliding to the left decreases the level. When you
move your finger away from the slide control, the cooking zone starts to operate at the level set.
Boost function
You can use the boost function to cook at the highest power level during a short period of time
(max. 5 minutes). After the maximum boost time the power will be reduced to setting 9.
Power limiter
The hob is equipped with a power limiter. If the total power of operating cooking zones exceeds
the maximum available amount of power, the power is automatically reduced. The display of the
cooking zone who is being reduced in its power is first flashing; the level is then automatically
reduced to the highest available power.
Keep warm function
Use this function to keep food warm directly after cooking (at approximately 70 °C).
• This will avoid liquids overflowing and burning on the bottom of the pan.
• This function can be started independently on all cooking zones.
• When the pan is removed from the cooking zone, the “Keep warm” function remains active
for approximately 10 minutes. The maximum duration of “keeping warm” is 2 hours.
USE