Owner Installation Instructions
DCB-05V2 Gate Controller
11
Fig 8.1
Fig 8.2
Fig 8.3
Fig 8.4
8. Setting Limits: Via Transmitter
Button 1
(Inch Open)
Button 4
(Inch Close)
Button 2
(Set)
The DCB-05V2 has the alternate ability to set travel limits using a
transmitter, allowing free movement around the gate to better assess
the desired limit positions. In order to use a transmitter, it must first
have at least one of its buttons coded to the gate controller. The
function assigned to the transmitter’s buttons is of no concern here
as the buttons are temporally assigned to OPEN, CLOSE and SET
(Fig. 8.5)
.
8.5 Code A Transmitter For Limit Setting
Navigating to “code transmitter” menu
a. Press NEXT to navigate to Menu 1.
b. Press SET to enter the code set procedure
(Fig. 8.6)
.
Storing Transmitter Code
a. Controller will prompt to press one of the transmitter’s Button.
b. Press the transmitter button you wish to use to operate the gate
opener (e.g. button 1) .
c. Press the same transmitter button again as prompted by display.
d. Press the SET button to store the transmitter.
Navigating To “Set Gate Travel Menu”
a. Press PREV to navigate to Menu 10.
b. Press SET to display MENU 10.1.
c. Press SET two times to enter the limit setting procedure. Follow
LCD prompts.
8.6 Setting Limits Via Transmitter
a. Press and hold Button 4 on the transmitter to close the gate
i. If the gate is closed too far, press Button 1 to “inch” the gate
towards open.
ii. When happy with the close limit position, press Button 2 to store
this in the memory.
b. Press Button 1 to open the gate.
i. If the gate is opened too far, press Button 4 to “inch” the gate
towards close
WARNING: The gate will automatically close and open
once next step is performed. Ensure that no persons or
objects are in the gates path.
c. When happy with the open limit position, press Button 2 on the
transmitter to store into memory.
d. The gate will now automatically close and open to calculate the safety
obstruction settings.
Fig 8.5
Fig 8.6
MENU 1
PREV
NEXT
EXIT
SET
Code Transmitter
PRESS
IMPORTANT NOTE:
Only
TrioCode
TM
128 Technology Transmitters
are compatible with this product.
