AT BF5 User Manual Download Page 15 | Manualshive

Page: 15 / 50

AT BF5 User Manual Download Page 15

BF5 User Manual v 2.3

Getting Started



15

Getting Started

The BF5 is shipped with the internal alkaline batteries installed and
connected.
To check readings, record or log readings use either:



a Windows PC running SunRead, or



an external data logger fully programmed and wired up, or



a SunScan system.

Each require their own special cable(s) - see page 11
See also

BF5 Quick Start Guide

In the field you need something on which to mount the BF5 horizontally.



Use a camera tripod, e.g. type

BFT1

, or



Bolt onto a suitable horizontal surface using the four M4 bolt holes

in the base of the BF5 plastic housing, or



Use the

BF5-M

cross arm. This is compatible with the Delta-T 2m

weather station mast and with many builder’s scaffolding
systems.

See also the

BF5 Quick Start Guide

.

PC software

The

SunRead

software runs under Microsoft Windows 98 or later, with a

free RS232 port or USB-Serial adapter.

SunRead Installation

You need

SunRead

version 1.5 (or later).

This is provided on the

Software and Manuals DVD

.

On most PCs, the CD will start automatically when inserted.
If it does not, run the file SETUP.EXE in the root folder
On the Contents Page scroll down to Software and click on

Install

SunRead software

Follow the links to install the software.
Note also the

SunRead Release Notes

information in the ReadMe.txt file

on the DVD.

«
...
13
14
15
16
17
...
»

Summary of Contents for BF5



















































Reviews:

No comments