5
DM481
English
FRONT PANEL DESCRIPTION
1. Tone Controls
This control allows users to attenuate the high or low
frequency signals of the corresponding channel� By turning
to the left, the low frequency sounds are reduced somewhat
(and are reduced further as the control is turned further),
and turning the control to the right has the same effect on
high frequency sounds�
2. Clip Indicators
This small LED indicator will illuminate 6 dB before the
signal of the channel is dynamically clipped. If it flashes
it is advisable to turn the level control down somewhat to
reduce the signal’s level and avoid distortion�
3. Mute Buttons
These buttons affectively mute the corresponding channels,
ensuring signals received by the channels are not sent onto
the main mixing bus�
4. Channel Level Controls
This control will alter the signal level that is sent from the
corresponding channel to the main mixing bus�
5. Master Level Control
This control is the final level control for the Main signal, sent
to the Main output on the rear of the DM481�
6. Power Switch
This switch is used to turn the mixer on and off. Ensure you
turn all level controls down before activating as to avoid any
unwanted signals being sent through the output�
1
2 4
3
5
6
