manualshive.com logo in svg

Asystems AV500HD, User Manual, Page: 20 / 46

Share
Download
Asystems AV500HD User Manual Download Page 20

18

AV500HD

English

I/O SETUP MENU

I/O Setup Menu manages your input/output source signals to their corresponding channels, please refer to the following 
steps for manual setup or adjustments

 

Channel Setup

Default Channel assignment:

The CH1 to B matches cross-points button 1 to B.

CH1:

 HDMI IN 1

CH2: 

HDMI 2

CH3: 

HDMI / SDI IN 3

CH4:

 HDMI / SDI IN 4

CH5 (DSK): 

DSK

●

  Move the joystick left or right to select I/O SETUP.

●

  Move the joystick up or down to highlight “CHANNEL 

SETUP” and press “ENTER” to confirm selection.

Corresponding Button/Channel to Channel 

Source Selection

Available Selections:

●

   

Digital HDMI In 1 to 4

●

   

SDI IN 3 & 4

●

   

DSK: The contents of this channel will be displayed when 

DSK is activated.

●

   

Disable  (X): The  cross-point  button  is  not  assigned 

(No 

function).

Channel Setup:
1. 

Navigate to I/O Setup > Channel Setup using the joystick. 

Push the ENTER button to confirm.

2. 

Use the joystick control to select a channel for configuration 

(or touch the icon directly on screen). The cursor location is 

identified with the Blue button.

3. 

Turn the SEL knob left and right to select input source 

from the top menu; if selected source is already taken by 

other channel, overriding will leave the other channel input 

blank; press ENTER to confirm selection.

Summary of Contents for AV500HD















































Reviews:

No comments