Asystems AV500HD User Manual Download Page 18 | Manualshive

Page: 18 / 46

Asystems AV500HD User Manual Download Page 18

16

AV500HD

English

1.

To enter the audio menu for any given channel, simply

hit the SETUP button on said channel.

Mono Channels offer:

  - +48V Phantom Power
  - High Pass Filter
  - Level
  - AUX and Reverb Sends
  - Channel Pan
  - Delay
  - Channel Soloing
  - Channel Muting
  - 3-Band EQ
  - Variable Gate (with threshold and release)
  - Compressor (with threshold, ratio, attack and release)

Stereo Channels include:

  - Mono Button (combines both left/right channels)
  - Channel Soloing
  - Channel Muting
  - Level
  - AUX and Reverb Sends
  - Channel Pan
  - Delay
  - 3-Band EQ
  - Input Select (Line, Video)
  - Follow Button
Use the touch screen, joystick and SEL knob to adjust
properties. Press ENTER to confirm where applicable.

Mono Channel Options

Stereo Channel Options

Audio Mixer

A unique function of the AV500HD is the on-board audio mixer. This includes 4 mono inputs (perfect for microphones) and
four stereo channels (great for analog mixers, digital media players, etc).

Menu Selections

●

Channel Setup

●

Main/Output

●

Reverb Mastering

Channel Setup

«
...
16
17
18
19
20
...
»

Summary of Contents for AV500HD















































Reviews:

No comments