Asyril Asycube Control URCap User Manual Download Page 7

Page: 7 / 50

Asycube Control URCap

User guide

Asycube Control URCap installation and configuration

Version: A2

000.102.083

7/50

Asycube

Control

URCap

installation

and

configuration

This section describes how to install and enable the Asycube Control URCap on the UR robot

and how to configure the Asycube and robot network settings, to connect the 2 devices

together and to allow the communications in between.

2.1. Installation

To install the URCap on the UR robot, the user must copy the URCap file, called Asyril-

AsycubeCtrl-[version].urcap on a USB key and plug it to one of the USB ports of the robot:

•

The robot must be switched on. It is not necessary to initialize it.

•

In the main menu, click on Setup Robot. Then, in the Setup Robot menu, click on

URCaps.

•

In the URCaps menu, click on the button

to add the URCap.

•

In the newly displayed window, navigate across the different folders of the robot and

look for your USB key content. Select the URCap file.

•

Check that the URCap installation status is all right & restart the robot.

Figure 2-1 - URCap Installation

Summary of Contents for Asycube Control URCap



















































Search results

Summary of Contents for Asycube Control URCap

Reviews:

Related manuals for Asycube Control URCap

Brands by name

Popular brands

Asyril Asycube Control URCap, User Manual

Search results

Summary of Contents for Asycube Control URCap

Reviews:

Related manuals for Asycube Control URCap

Brands by name

Popular brands