Asycube Largo A5 - Asyril SA
Operating Manual
©
Copyright Asyril S.A.
Maintenance and reparation
v1.2
FO 32.03.118
Operating Manual
Asycube Largo A5
- Asyril SA
34/45
Configure the Asycube with a new backlight color
4.4.1.1.
You can set the color of the backlight in the Asycube. It is useful for example to be able to
adapt interfaces depending of the color or depending if there is no backlight.
With HMI
To modify the parameter, use the following procedure:
Figure 4-3 : change backlight color in HMI
Ref. Designation
Description
(A)
"Asycube" button
Press this button to display the Asycube screen.
(B)
"Asycube
configuration"
button
Press this button to display the Asycube configuration tab.
(C)
“Color” select box
This select box allows selecting the color of the backlight.
If “None” is chosen, backlight tab and backlight switches
disappear.
For more information about the HMI, please refer to the user interface documentation.
With dll
To modify the parameter with dll, use this function:
SetBacklightColor(BacklightColor color, string password)
The password is important, because to write this parameter, you need to be logged in the
firmware as Integrator. Password is 1234.
For more information on the DLL, please refer to the user guide documentation.
(A)
(C)
(B)
