Asycube Largo A5 - Asyril SA
Operating Manual
©
Copyright Asyril S.A.
Description
v1.2
FO 32.03.118
Operating Manual
Asycube Largo A5
- Asyril SA
21/45
Accessories and Optional modules
2.6.
Additional platform
2.6.1.
In order to improve the availability of certain components on the surface of the feeder, it is
possible to structure the plate surface. Asyril can provide various types of plates on request.
Frequently used structures on Asycube Largo A5 are as follows:
Plate
type
Example
– picture
Example
– drawing
Advantage
Plane
Ex : Bolts
This type of plate can be used for a
large variety of components mainly
components with a flat surface
allowing a stable resting position.
Grooves
(deep)
Ex : Screws, Rivets
Screw type components can be fed in
vertical position when the plate is
structured with deep grooves.
Grooves
(wide)
Ex : Cylinders, Needles
Wide grooves are useful when
cylindrical components are fed. They
reduce the stabilising time significantly
after component displacements on the
plate surface (stop the components
from rolling on the surface).
Grooves
(narrow)
Ex : Thin washers
Narrow grooves are necessary to
reduce surface contact especially for
flat and light components. This
reduces adhesion forces and improves
the component displacements on the
feeder surface. It also improves the
pick-performance of the robot.
