Rubber Track Loader
9. Loader/Transmission Controls Disassembly and Assembly
9-6
Loader Float Magnet Installation
Position
Magnet
Figure 9-20
9-010
1.
Position the loader float magnet at the front of
the control.
Install
Screw
Figure 9-21
9-009
2.
The loader float magnet is held in place by an
allen screw at the bottom of the magnet. Install
this screw.
Loader Float
Magnet
Figure 9-22
9-008
3.
With the loader float magnet installed, the con-
trol is ready to mount in the console.
Pull the
Boot Down
Figure 9-23
9-007
4.
Position the control on the console and pull the
rubber boot down over the base of the joystick.
Install
Screws
Figure 9-24
9-003
5.
Install the four retaining screws in the top cover.
Position the
Side Cover
Figure 9-25
9-002
6.
Place the side cover in position on the console.
https://tractormanualz.com/
Summary of Contents for RC30 2022
