10-1
10. Transmission and Drive
Disassembly and Assembly
Chapter Overview
This chapter provides disassembly and assembly
procedures for the transmission and drive assembly.
Personal Safety
! WARNING !
Improper operation, lubrication, maintenance or repair
of this product can be dangerous and could result in
injury or death.
Do not operate or perform any lubrication, mainte-
nance or repair on this product until you have read
and understood the operation, lubrication, mainte-
nance and repair information.
Before starting any disassembly or assembly proce-
dures, refer to
Chapter 2. Product Safety – Basic
Precautions
for personal safety information.
Machine Preparation
! WARNING !
Accidental machine starting can cause injury or death
to personnel working on the machine.
To avoid accidental machine starting, disconnect the
battery cables from the battery and tape the battery
clamps and remove the key.
Place a “Do Not Operate” tag prominently on the ma-
chine to inform personnel that the machine is being
worked on.
Before starting any disassembly or assembly proce-
dures, refer to
Chapter 2. Product Safety – Repair
for machine preparation information.
Preliminary Checkout
If troubleshooting is required prior to disassembly or
assembly, refer to
Chapter 15. Troubleshooting
.
Transmission and Drive
Disassembly and Assembly
Procedures
Disassembly and assembly procedures are provided
for the following transmission and drive components.
•
Brake Cylinders
•
Drive Motors
•
Auxiliary Gear Pump
•
Tandem Pump
•
Pump Drive Coupler
N
ote:
Procedures are provided for only those transmission
and drive components listed above. However, information
for removal and installation of other transmission and drive
components can be obtained from the Rubber Track
Loader Parts List manual.
N
ote:
Refer to Figure 3-2 for an overview of the auxiliary
circuit system and Figure 3-3 for an overview of the drive
loop system.
Brake Cylinder Removal and
Installation
Refer to
Chapter 12. Undercarriage Disassembly
and Assembly – Brake Removal and Installation
for
removal and installation of the brake cylinders.
Drive Motor Removal and In-
stallation
Refer to
Chapter 12. Undercarriage Disassembly
and Assembly – Drive Motor Removal and Installa-
tion
for removal and installation of the drive motors.
https://tractormanualz.com/
Summary of Contents for RC30 2022
