12
Machine Operation
Hydraulic Quick Attach (RC-60/optional)
The RC-60 is available with a
hydraulic quick attach mechanism. This
feature allows an operator to fasten or
unfasten attachments without exiting the
machine. To use this feature, make sure
the switch is in the unlocked position,
then follow the instructions on page 11
that describe the process of fastening the
attachment to the quick attach up to the
point of locking it in place. Once the
attachment is in place, move the switch
to the lock position, then confirm
engagement by following steps 1-3.
Self Leveling
The RC-60 is equipped with a self-
leveling loader valve (photo A). This
feature is also commonly referred to as
“bucket positioning”. This function
maintains the position of an attachment
throughout the upward cycle of the lift
arms.
Note: The self-leveling feature works on the
upward cycle only. The operator must posi-
tion the attachment manually on the down-
ward cycle.
The self leveling feature can be turned
on or off with the switch located on the
dash panel (photo B).
The self-leveling system does not
automatically level your attachment.
When activated, it works to keep the
attachment in the same relative position
throughout the upward cycle of the lift
arms. For example, if you have a bucket
full of dirt that is fully curled at ground
level, the self leveling system will main-
tain the position of the bucket during the
lift cycle to prevent spilling as the lift
arms are raised.
Note: During the upward cycle, the self-lev-
eling function can be overridden by operat-
ing the tilt or curl functions of the joystick.
A
B
Self-level switch
