Asus ZenPad Z380C, E-Manual

Page: 167 / 170

Appendix
167
CE Mark Warning
0682
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and
recognition of conformity.
The highest CE SAR value for the device is 1.02 W/Kg.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
For France, headphones/earphones for this device are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-1:2013 and/or EN 50332-2:2013 standard
required by French Article L.5232-1.
RF Exposure information (SAR) - CE
This device meets the EU requirements (1999/5/EC) on the limitation of exposure of the general
public to electromagnetic fields by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientific organizations
through regular and thorough evaluations of scientific studies. The unit of measurement for the
European Council’s recommended limit for mobile devices is the “Specific Absorption Rate” (SAR),
and the SAR limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of
the International Commission on Non-Ionizing Radiation Protection (ICNIRP).
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines
and the European Standard EN 50566 and EN 62209-2. SAR is measured with the device at a
separation of 1.0 cm to the body while transmitting at the highest certified output power level in
all frequency bands of the mobile device.
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits
use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated
diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials
and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in
Schedule-II of the Rule.