Asus Z9PE-D16 Series User Manual Download Page 30

Page: 30 / 194

2-12

Chapter 2: Hardware information

12. Connect the CPU fan cable to the connector on the motherboard labeled

CPU_FAN1 / CPU_FAN2.

DO NOT forget to connect the CPU fan connector! Hardware monitoring errors

can occur if you fail to plug this connector.

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it

gets into your eyes or touches your skin, wash it off immediately, and seek

professional medical help.

Some heatsinks come with pre-

applied thermal paste. If so, skip

this step.

11. Apply some Thermal Interface

Material to the exposed area of

the CPU that the heatsink will be

in contact with, ensuring that it is

spread in an even thin layer.

Summary of Contents for Z9PE-D16 Series



































































































































































































Search results

Summary of Contents for Z9PE-D16 Series

Reviews:

Related manuals for Z9PE-D16 Series

Brands by name

Popular brands

Asus Z9PE-D16 Series, User Manual

Search results

Summary of Contents for Z9PE-D16 Series

Reviews:

Related manuals for Z9PE-D16 Series

Brands by name

Popular brands