Asus Z9PE-D16 Series User Manual Download Page 137

Page: 137 / 194

ASUS Z9PE-D16 Series

5-25

5.3

Intel

Rapid Storage Technology

enterprise SCU/SATA Option ROM

Utility

The Intel

Rapid Storage Technology enterprise SCU / SATA Option ROM utility

allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s)

from Serial ATA hard disk drives that are connected to the Serial ATA connectors

supported by the Southbridge.
You can create RAID mode by use of onboard AHCI SATA ports.

To use onboard SATA ports:

1. Install all the Serial ATA hard disk drives.
2. Turning on the system. During POST, press,Del. to enter BIOS. Go to

Advanced Menu

PCH SATA Configuration

SATA Mode

, then press

<Enter>.

3. Set

SATA Mode

RAID Mode

and save, then reboot system.

4. During POST, press <Ctrl+I> to display the utility main menu.

To use SCU SATA ports:

1. Install all the hard disk drives.
2. Turn on the system.

3. Confirm all the SATA hard disk drives you installed are correctly displayed,

then reboot system.

4. During POST, press <Ctrl+I> to display the utility main menu.

Summary of Contents for Z9PE-D16 Series



































































































































































































Search results

Summary of Contents for Z9PE-D16 Series

Reviews:

Related manuals for Z9PE-D16 Series

Brands by name

Popular brands

Asus Z9PE-D16 Series, User Manual

Search results

Summary of Contents for Z9PE-D16 Series

Reviews:

Related manuals for Z9PE-D16 Series

Brands by name

Popular brands