Asus Z97-DELUXE Series User Manual Download Page 63

Page: 63 / 184

ASUS Z97-DELUXE Series

1-45

Chapter 1

13. Thunderbolt header (5-pin TB_HEADER)

This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt

Technology, allowing you to connect up to six Thunderbolt-enabled devices and a

DisplayPort-enabled display in a daisy-chain configuration.

The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately.

14. M.2 socket 3

This socket allows you to install an M.2 (NGFF) SSD module.

•

This socket supports M Key and type 2260/2280 storage devices.

•

The M.2 Socket 3 shares bandwidth with SATAEXPRESS_1. Refer to section

3.6.3

PCH Storage Configuration

of this user guide for more details.

•

When using Intel

Desktop Responsiveness technologies with PCIe M.2 device,

ensure to set up the Windows

UEFI operating system under RAID mode.

The M.2 (NGFF) SSD module is purchased separately.

Summary of Contents for Z97-DELUXE Series

























































































































































































Search results

Summary of Contents for Z97-DELUXE Series

Reviews:

Asus Z97-DELUXE Series, User Manual, Page: 63 / 184

Search results

Summary of Contents for Z97-DELUXE Series

Reviews: