Asus Z97-DELUXE Series User Manual Download Page 123

Page: 123 / 184

ASUS Z97-DELUXE Series

3-39

Chapter 3

3.6.5

USB Configuration

The items in this menu allow you to change the USB-related features.

The

Mass Storage Devices

item shows the auto-detected values. If no USB device is

detected, the item shows

None

Legacy USB Support [Enabled]

[Enabled]

Your system supports the USB devices in legacy operating systems.

[Disabled]

Your USB devices can be used for BIOS setup only and cannot be

recognized in the boot devices list.

[Auto]

Your system automatically detects the presence of USB devices at startup.

If any USB devices are detected, the legacy USB support is enabled.

Intel xHCI Mode [Smart Auto]

[Auto]

The xHCI is automatically enabled and runs at USB 3.0 mode when the

xHCI driver is installed in the operating system.

[Smart Auto]

Upon detection, the xHCI driver supports the USB 3.0 mode during both

POST and operating system.

[Enabled]

Enables the xHCI controller.

[Disabled]

Disables the xHCI controller.

Memory Configuration

This item allows you to configure the memory configuration parameters.

Memory Scrambler [Enabled]

Set this item to

[Enabled]

to support high frequency DRAMs for a better stability.

Configuration options: [Enabled] [Disabled]

Memory Remap [Enabled]

Set this item to

[Enabled]

to support DRAM address remapping for 64-bit operating

systems.
Configuration options: [Enabled] [Disabled]

Summary of Contents for Z97-DELUXE Series

























































































































































































Search results

Summary of Contents for Z97-DELUXE Series

Reviews:

Asus Z97-DELUXE Series, User Manual, Page: 123 / 184

Search results

Summary of Contents for Z97-DELUXE Series

Reviews: