Asus Z87-WS User Manual Download Page 68

Page: 68 / 186

2-12

Chapter 2: Basic installation

Chapter 2

•

Do not disconnect the USB flash drive or power off the system during the BIOS

updating process. Doing so will interrupt the BIOS updating process. In case the

process is interrupted, follow the steps again to update the BIOS.

• If FLBK_LED flashes for five seconds and turns into a stable light, this indicates

that USB BIOS Flashback is not working properly due to an improper USB flash

drive connection, a BIOS file name error, or an incompatible BIOS file format. If this

happens, restart the syetem.

•

Updating the BIOS poses some risks. If the BIOS program is damaged during the

updating process and the system fails to reboot, please contact your local ASUS

Service Center for assistance

For more BIOS update utilities in BIOS setup, refer to the section

3.11 Updating BIOS

Chapter 3.

Summary of Contents for Z87-WS



























































































































































































Search results

Summary of Contents for Z87-WS

Reviews:

Asus Z87-WS, User Manual, Page: 68 / 186

Search results

Summary of Contents for Z87-WS

Reviews: