Asus Z87-WS User Manual Download Page 47

Page: 47 / 186

ASUS Z87-WS

1-31

Chapter 1

1.2.8

Internal connectors

Intel

Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

configuration with the Intel

Rapid Storage Technology through the onboard Intel

Z87

chipset.

•

These connectors are set to [

AHCI Mode

] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [

RAID

Mode

]. Refer to section

3.6.3 SATA Configuration

for details.

•

Before creating a RAID set, refer to section

5.1 RAID configurations

or the manual

bundled in the motherboard support DVD.

Summary of Contents for Z87-WS



























































































































































































Search results

Summary of Contents for Z87-WS

Reviews:

Asus Z87-WS, User Manual, Page: 47 / 186

Search results

Summary of Contents for Z87-WS

Reviews: