Asus Z170-DELUXE Series User Manual Download Page 119

Page: 119 / 186

ASUS Z170-DELUXE Series

3-41

Chapter 3

HD Audio Controller [Enabled]

This item allows you to use the Azalia High Definition Audio Controller
Configuration options: [Disabled] [Enabled]

The following items appear only when you set the HD Audio Controller

[Enabled]

Front Panel Type [HD Audio]

This item allows you to set the front panel audio connector (AAFP) mode to legacy

AC’97 or high-definition audio depending on the audio standard that the front panel

audio module supports.
[HD Audio]

Sets the front panel audio connector (AAFP) mode to high definition

audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

SPDIF Out Type [SPDIF]

[SPDIF]

Sets to an SPDIF audio output.

[HDMI]

Sets to an HDMI audio output.

PCI-EX16_3 Bandwidth [Enabled]

[Auto]

Run at X2 mode with SATA6G_56 enabled.

[X4 mode]

Run at X4 mode for higher performance with SATA6G_56 disabled.

M.2 and SATA Express Mode Configuration [SATA EXpress]

[M.2]

SATA mode will be switched to M.2. SATA Express can only support PCIE

devices.

[SATA EXpress] SATA mode will be switched to SATA Express. M.2 can only support PCIE

devices.

ASMedia USB 3.1 Controller(USB3.1_EC1/USB3.1EA2) [Enabled]

This item allows you to disable or enable the ASMedia

USB 3.1 controller of your system.

Configuration options: [Disabled] [Enabled]

ASMedia USB 3.1 Controller(USB3.1_E34) [Enabled]

This item allows you to disable or enable the ASMedia

USB 3.1 controller of your system.

Configuration options: [Disabled] [Enabled]

ASMedia USB 3.1 Controller(USB3.1_E56) [Enabled]

This item allows you to disable or enable the ASMedia

USB 3.1 controller of your system.

Configuration options: [Disabled] [Enabled]

ASMedia USB 3.1 Battery Charging Support [Disabled]

This item allows you to disable or enable the ASMedia USB 3.1 battery charging support of

your system.
Configuration options: [Disabled] [Enabled]

Summary of Contents for Z170-DELUXE Series



























































































































































































Search results

Summary of Contents for Z170-DELUXE Series

Reviews:

Asus Z170-DELUXE Series, User Manual, Page: 119 / 186

Search results

Summary of Contents for Z170-DELUXE Series

Reviews: