Asus Z10PA-U8 User Manual Download Page 83

Page: 83 / 186

4-23

Z10PA-U8 Series

4.4.12 USB Configuration

Legacy USB Support [Enabled]

Allows you to enable or disable Legacy USB device support.

Configuration options: [Enabled] [Disabled] [Auto]

XHCI Hand-off [Enabled]

This is a workaround for 0Ses without XHCI hand-off support. The XHCI ownership change

should be claimed by XHCI driver.
Configuration options: [Disabled] [Enabled]

EHCI Hand-off [Disabled]

This is a workaround for 0Ses without EHCI hand-off support. The EHCI ownership change

should be claimed by EHCI driver.

Configuration options: [Disabled] [Enabled]

USB Mass Storage Driver Support [Enabled]

Allows you to enable or disable the USB Mass Storage drvier support.

Configuration options: [Disabled] [Enabled]

Port 60/64 Emulation [Enabled]

This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for

the complete USB keyboard legacy support for non-USB aware OSes.
Configuration options: [Disabled] [Enabled]

Summary of Contents for Z10PA-U8



























































































































































































Search results

Summary of Contents for Z10PA-U8

Reviews:

Asus Z10PA-U8, User Manual, Page: 83 / 186

Search results

Summary of Contents for Z10PA-U8

Reviews: