Asus X99-WS/IPMI User Manual Download Page 47

Page: 47 / 174

ASUS X99-WS/IPMI

1-33

Chapter 1

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

•

If you want to connect a high-definition or an AC’97 front panel audio module to this

connector, set the Front Panel Type item in the BIOS setup to

[HD]

[AC97]

System Management Bus (SMBUS) connector (5-1 pin SMBUS1)

This connector controls the system and power management-related tasks. This

connector processes the messages to and from devices rather than tripping the

individual control lines.

Summary of Contents for X99-WS/IPMI















































































































































































Search results

Summary of Contents for X99-WS/IPMI

Reviews:

Related manuals for X99-WS/IPMI

Brands by name

Popular brands

Asus X99-WS/IPMI, User Manual

Search results

Summary of Contents for X99-WS/IPMI

Reviews:

Related manuals for X99-WS/IPMI

Brands by name

Popular brands