Asus WL-120g V2A User Manual Download | Manualshive

Page: 58 / 71

background image

ASUS WLAN Card

59

Chapter 4 - Troubleshooting

Chapter 4

Troubleshooting

Cannot connect to a Station (ASUS WLAN Card)

Follow the procedure below to configure your ASUS WLAN Card.

a. Verify that the “Network Type” is in “Ad Hoc” mode.

b. Verify that the “SSID” of your ASUS WLAN Card is set to the same

“SSID” of the other station (or another ASUS WLAN Card).

c. Verify that the “channel” of the ASUS WLAN Card is “Auto” or set to

the same “channel” of the other station (or another ASUS WLAN Card).

d. Verify that the “Encryption” type is the same as the other station (or

another ASUS WLAN Card). If “WEP” encryption is enabled, you
must set the same “WEP” Keys on both stations.

Bad link quality or bad signal strength

There are two possible reasons. First is radio interference, keep the environment
around the ASUS WLAN Card away from microwave ovens and large metal
objects. Then try to reorient the ASUS WLAN Card antenna. Second is the
distance, decrease the distance between your ASUS WLAN Card and the Access
Point or station (or another ASUS WLAN Card).

The TCP/IP protocol did not bind to the ASUS WLAN PC Card.

This will occur when the computer already has six TCP/IP bindings in Windows
98 or ten bindings in Windows Me. These limits are imposed by the Microsoft
operating system.

Solution: If your computer already has the maximum number of TCP/IP
bindings, remove one of the network adapters from the Network configuration
before installing the ASUS WLAN Card driver.

«
...
56
57
58
59
60
...
»

Summary of Contents for WL-120g V2A








































































Reviews:

No comments

Related manuals for WL-120g V2A

Brand: H3C Pages: 6

OfficeConnect 3CP4144

Brand: 3Com Pages: 4

OfficeConnect 3CP4144

Brand: 3Com Pages: 2

Brand: H3C Pages: 60

Brand: H3C Pages: 149

Brand: 3Com Pages: 27

Brand: Cambium Networks Pages: 68

Brand: Cambium Networks Pages: 110

Module NI PXI-8250

Brand: National Instruments Pages: 39

Brand: EnGenius Pages: 3

Brand: Macsense Pages: 39

Brand: XNET Pages: 17

Brand: Maipu Pages: 80

Brand: axing Pages: 52

Media Board D/120JCT-LS-EW

Brand: Dialogic Pages: 2

Brand: Supermicro Pages: 27

Brand: Asante Pages: 150

2000 IDU Series

Brand: EMS Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands