Asus V4-M3N8200 Page 15 Installation Manual Download

Page: 15 / 104

1-5

ASUS V4-M3N8200

5. Chassis fan vent.

This vent is for the fan that provides ventilation inside the

system chassis.

6. PS/2 keyboard port.

This purple 6-pin connector is for a PS/2 keyboard.

7. USB 2.0 ports 1, 2, 3, 4, 5, and 6.

These 4-pin Universal Serial Bus (USB)

ports are available for connecting USB 2.0 devices.

8. Optical S/PDIF Out port.

This port connects an external audio output device

via an optical S/PDIF cable.

9. HDMI port.

This port is for a High-Definition Multimedia Interface (HDMI)

connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray

and other protected content.

10. DVI pot.

This port is for any DVI-D compatible device. DVI-D can not be

converted to output RGB Signal to CRT and is not compatible with DVI-I.

Dual display output support

• This table indicates that whether the following dual display outputs are

supported for your motherboard:

Dual display outputs

Supported

Not supported

DVI + D-Sub

•

DVI + HDMI

•

HDMI + D-Sub

•

• During POST, only the monitor connected to the D-Sub port has display.

The dual display function works only under Windows.

Playback of HD DVD and Blu-Ray Discs

• For better playback quality, we recommend that you follow the system

requirements listed below.

Suggested list

CPU

AMD

Athlon 4400+

DIMM

DDR2 800 (1GB or higher)

BIOS setup

Frame Buffer Size--256MB or higher

Playback

software

CyberLink

PowerDVD 7.3

(not supporting video acceleration)

File format

Best resolution

Windows XP

Windows Vista

Non-protected clips

1920 x 1080p

HD-DVD

1920 x 1080p

1280 x 1080p

Blu-Ray

1280 x 1080p

• Supported DVD formats: VC-1, H.264, and MPEG-2.

• To play HD DVD or Blu-Ray Disc, ensure to use HDCP compliant devices

and softwares.

Summary of Contents for V4-M3N8200









































































































Search results

Summary of Contents for V4-M3N8200

Reviews:

Related manuals for V4-M3N8200

Brands by name

Popular brands

Asus V4-M3N8200, Installation Manual

Search results

Summary of Contents for V4-M3N8200

Reviews:

Related manuals for V4-M3N8200

Brands by name

Popular brands