Asus V4-M3N8200 Page 12 Installation Manual Download

Page: 12 / 104

1-2

Chapter 1: System introduction

1.1

Welcome!

Thank you for choosing the ASUS V4-M3N8200!
The ASUS V4-M3N8200 is an all-in-one barebone system with a versatile home

entertainment feature.
The system comes in a stylish casing and powered by the ASUS motherboard with

the AMD Socket AM2+ that supports the AMD

Phenom™FX / Phenom™ / Athlon™ /

Sempron

processors.

The system supports up to 8 GB of system memory using DDR2-1066/800/

667/533 DIMMs. High-resolution graphics via Nvidia on board Gfx or PCI Express

x16 slot, Serial ATA, USB 2.0, and 8-channel audio feature the system and take

you ahead in the world of power computing.

1.2

Front panel

The front panel includes the optical drive bays, hard disk drive bay, power button,

and I/O ports.

10 11

13 14

Summary of Contents for V4-M3N8200









































































































Search results

Summary of Contents for V4-M3N8200

Reviews:

Related manuals for V4-M3N8200

Brands by name

Popular brands

Asus V4-M3N8200, Installation Manual

Search results

Summary of Contents for V4-M3N8200

Reviews:

Related manuals for V4-M3N8200

Brands by name

Popular brands