5-22
Chapter 5: BIOS setup
5.4.4
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
South Bridge Configuration
North Bridge chipset Configuration
Memory Remap Feature
[Enabled]
Configure DRAM Timing by SPD
[Enabled]
Initiate Graphic Adapter
[PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
PEG Port Configuration
PEG Force x1
[Disabled]
Video Function Configuration
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
[PEG/PCI] Sets PCI Express x 16 graphics card as the primary display controller
(Default). [PCI/PEG] Sets the PCI graphics card as the primary display controller.
Configure North Bridge
features.
