Asus V-Series P5G31 Installation Manual Download

Page: 84 / 99

ASUS V-Series P5G31

5-19

The Module Version and USB Devices Enabled items show the

auto-detected values. If no USB device is detected, the item shows None.

USB Functions [8 USB Ports]

Allows you to disable or select the different values of the USB functions.

Configuration options: [Disabled] [2 USB Ports] [4 USB Ports] [6 USB Ports] [8

USB Ports]

USB 2.0 Controller [Enabled]

Allows you to enable or disable USB 2.0 controller. Configuration options:

[Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including

USB flash drives and USB hard drives. Setting to Auto allows the system to

detect the presence of USB devices at startup. If detected, the USB controller

legacy mode is enabled. If no USB device is detected, the legacy USB support is

disabled.

Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full

Speed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]

BIOS EHCI Hand-Off [Enabled]

Allows you to enable support for operating systems without an EHCI hand-off

feature. Configuration options: [Disabled] [Enabled]

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay [20 Sec]

Sets the number of seconds POST waits for the USB mass storage device

after start unit command. Configuration options: [10 Sec] [20 Sec] [30 Sec]

[40 Sec]

Emulation Type [Auto]

Selects the Emulation type. When set to Auto, USB devices less than 530MB

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay

[20 Sec]

Device #1 Natac

Emulation Type

[Auto]

Number of seconds

POST waits for the

USB mass storage

device after start

unit command.

Summary of Contents for V-Series P5G31




































































































Search results

Summary of Contents for V-Series P5G31

Reviews:

Related manuals for V-Series P5G31

Brands by name

Popular brands

Asus V-Series P5G31, Installation Manual

Search results

Summary of Contents for V-Series P5G31

Reviews:

Related manuals for V-Series P5G31

Brands by name

Popular brands