manualshive.com logo in svg

Asus V-Series P5G31, Installation Manual, Page: 63 / 99

Share
Download
Asus V-Series P5G31 Installation Manual Download Page 63

4-10

Chapter 4: Motherboard info

10.  Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that 

supports either HD Audio or legacy AC’97 audio standard.

•

  We recommend that you connect a high-definition front panel audio 

module to this connector to avail of the motherboard’s high-definition audio 

capability.

•  By default, this connector is set to HD Audio. If you want to connect a High 

Definition front panel audio module to this connector, set the 

Front Panel 

Support Type

 item in the BIOS to [HD Audio]. See section “2.4.4 Chipset” 

for details.

9.  Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. 

Connect one end of the chassis intrusion sensor or switch cable to this 

connector. The chassis intrusion sensor or switch sends a high-level signal to 

this connector when a chassis component is removed or replaced. The signal 

is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “ Ground” are shorted with 

a jumper cap. Remove the jumper caps only when you intend to use the 

chassis intrusion detection feature.

R

Intrusion Connector

CHASSIS

+5VSB_MB

Chassis Signal GN

D

(Default)

R

Front Panel Audio Connector

HP_HD

MIC2_L

HP_R

HP_L

MIC2_J

D

Jack_Sens

e

MIC2_R

PRESENSE#

AGND

AAFP

Legacy A

C’97-compliant

pin definition

NC

MIC2_L

Line out_R

Line out_L

NC

NC

MIC2_R

NC

AGND

Azalia-compliant

pin definition

Summary of Contents for V-Series P5G31




































































































Reviews:

No comments