Asus TW100-E5 - iQuadro - 0 MB RAM User Manual Download Page 102

Page: 102 / 136

6-4

Chapter 6: Driver installation

5. Select the RAID controller driver from the list, then press <Enter>.

ENTER=Continue F3=Exit

Windows Setup

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

NVIDIA RAID Driver (required)

NVIDIA nForce Storage Controller (required)

6. The Windows

Setup loads the RAID controller drivers from the RAID driver

disk. When prompted, press <Enter> to continue installation.

7. Setup then proceeds with the OS installation. Follow screen instructions to

continue.

6.1.4

Installing an operating system

This motherboard supports Windows

XP/64-bit XP/Vista/64-bit Vista operating

systems (OS). Always install the latest OS version and corresponding updates to

maximize the features of your hardware.

• Motherboard settings and hardware options vary. Use the setup

procedures presented in this chapter for reference only. Refer to your OS

documentation for detailed information.

• Make sure that you install Windows

XP Service Pack 2 or later versions

before installing the drivers for better compatibility and system stability.

Windows

Vista OS

To install the RAID controller driver when installing Windows

Vista OS

1. Insert the floppy disk with RAID driver into the floppy disk drive.
2. During the OS installation, select

Load Driver

, click

Browse

, then select

Floppy Disk Drive (A:)

. Click

3. Select

NVIDIA nForce RAID controller (A:\nvrd32.inf)

and click

Next

4. Follow the succeeding screen instructions to complete the installation.

Summary of Contents for TW100-E5 - iQuadro - 0 MB RAM









































































































































Search results

Summary of Contents for TW100-E5 - iQuadro - 0 MB RAM

Reviews:

Related manuals for TW100-E5 - iQuadro - 0 MB RAM

Brands by name

Popular brands

Asus TW100-E5 - iQuadro - 0 MB RAM, User Manual

Search results

Summary of Contents for TW100-E5 - iQuadro - 0 MB RAM

Reviews:

Related manuals for TW100-E5 - iQuadro - 0 MB RAM

Brands by name

Popular brands