Asus TS150-E2, User Manual

Page: 54 / 134

C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n 4 - 6 4 - 6 4 - 6 4 - 6 4 - 6
3 . 3 .
3 . 3 .
3 . U S B d e v i c e w a k e - u p ( 3 - p i n U S B P W 1 2 , U S B P W 3 4 , U S B d e v i c e w a k e - u p ( 3 - p i n U S B P W 1 2 , U S B P W 3 4 ,
U S B d e v i c e w a k e - u p ( 3 - p i n U S B P W 1 2 , U S B P W 3 4 , U S B d e v i c e w a k e - u p ( 3 - p i n U S B P W 1 2 , U S B P W 3 4 ,
U S B d e v i c e w a k e - u p ( 3 - p i n U S B P W 1 2 , U S B P W 3 4 ,
U S B P W 5 6 , U S B P W 7 8 )
U S B P W 5 6 , U S B P W 7 8 ) U S B P W 5 6 , U S B P W 7 8 ) U S B P W 5 6 , U S B P W 7 8 ) U S B P W 5 6 , U S B P W 7 8 )
Set these jumpers to +5V to wake up the computer from S1 sleep
mode using the connected USB devices. Set to +5VSB to wake up
from S4 sleep mode (no power to CPU, DRAM power supply in reduced
power mode).
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise, the
system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
2 . 2 .
2 . 2 .
2 . C P U f a n m o d e s e l e c t i o n ( 3 - p i n F M _ C P U 1 , F M _ C P U 2 ) C P U f a n m o d e s e l e c t i o n ( 3 - p i n F M _ C P U 1 , F M _ C P U 2 )
C P U f a n m o d e s e l e c t i o n ( 3 - p i n F M _ C P U 1 , F M _ C P U 2 ) C P U f a n m o d e s e l e c t i o n ( 3 - p i n F M _ C P U 1 , F M _ C P U 2 )
C P U f a n m o d e s e l e c t i o n ( 3 - p i n F M _ C P U 1 , F M _ C P U 2 )
These jumpers allow you to connect either a 3-pin or a 4-pin fan cable
plug to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these
jumpers to pins 1-2 if you are using a 3-pin fan cable plug, or to pins
2-3 if you are using a 4-pin plug.
P5CR-LS
3 2 2 1
P5CR-VM FM_CPU Setting
FM_CPU2
FM_CPU1
DC mode PWM
(Default)
1 2 2 3
DC mode PWM
(Default)
P5CR-LS
P5CR-VM USB device wake-up
USBPW12
(Default)
+5V +5VSB
2 3 1 2
USBPW34
USBPW78
(Default)
+5V +5VSB
2 3 1 2
USBPW56
(Default)
+5V +5VSB
2 3 1 2