Asus TS150-E2, User Manual

Page: 100 / 134

C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n 5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0
5.5.2 5.5.2
5.5.2 5.5.2
5.5.2 APM Configuration APM Configuration
APM Configuration APM Configuration
APM Configuration
APM Configuration
Restore on AC Power Loss [Last State]
Power On By RTC Alarm [Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices [Disabled]
Power On By PS/2 Keyboard [Disabled]
Keyboard Wakeup Password : Not Installed
Power On By PS/2 Mouse
[Disabled]
Go into On/Off or
Suspend when Power
button is pressed.
5.5 Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM). Select an item then press <Enter> to
display the configuration options.
5.5.1 5.5.1
5.5.1 5.5.1
5.5.1 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC). When set to Enabled, the ACPI APIC table pointer is
included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]