background image

v i i i

v i i i

v i i i

v i i i

v i i i

About this guide

Audience

Audience

Audience

Audience

Audience

This guide provides general information and installation instructions about
the ASUS Terminator 1 barebone system. This guide is intended for
experienced users and integrators with hardware knowledge of personal
computers.

How this guide is organized

How this guide is organized

How this guide is organized

How this guide is organized

How this guide is organized

This guide contains the following parts:

1 .

1 .

1 .

1 .

1 .

C h a p t e r   1 :   S y s t e m   i n t r o d u c t i o n

C h a p t e r   1 :   S y s t e m   i n t r o d u c t i o n

C h a p t e r   1 :   S y s t e m   i n t r o d u c t i o n

C h a p t e r   1 :   S y s t e m   i n t r o d u c t i o n

C h a p t e r   1 :   S y s t e m   i n t r o d u c t i o n
This chapter gives a general description of the ASUS Terminator 1.
The chapter lists the system features including introduction on the
front and rear panel, and internal components.

2 .

2 .

2 .

2 .

2 .

C h a p t e r   2 :   B a s i c   i n s t a l l a t i o n

C h a p t e r   2 :   B a s i c   i n s t a l l a t i o n

C h a p t e r   2 :   B a s i c   i n s t a l l a t i o n

C h a p t e r   2 :   B a s i c   i n s t a l l a t i o n

C h a p t e r   2 :   B a s i c   i n s t a l l a t i o n
This chapter provides step-by-step instructions on how to install
components in the system.

3 .

3 .

3 .

3 .

3 .

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p
This chapter helps you power up the system and install drivers and
utilities from the support CD.

4 .

4 .

4 .

4 .

4 .

C h a p t e r   4 :   M o t h e r b o a r d   i n f o r m a t i o n

C h a p t e r   4 :   M o t h e r b o a r d   i n f o r m a t i o n

C h a p t e r   4 :   M o t h e r b o a r d   i n f o r m a t i o n

C h a p t e r   4 :   M o t h e r b o a r d   i n f o r m a t i o n

C h a p t e r   4 :   M o t h e r b o a r d   i n f o r m a t i o n
This chapter gives information about the motherboard that comes
with the system. This chapter includes the motherboard layout,
jumper settings, and connector locations.

5 .

5 .

5 .

5 .

5 .

C h a p t e r   5 :   B I O S   i n f o r m a t i o n

C h a p t e r   5 :   B I O S   i n f o r m a t i o n

C h a p t e r   5 :   B I O S   i n f o r m a t i o n

C h a p t e r   5 :   B I O S   i n f o r m a t i o n

C h a p t e r   5 :   B I O S   i n f o r m a t i o n

This chapter tells how to change system settings through the BIOS
Setup menus and describes the BIOS parameters.

Summary of Contents for Terminator 1 C3































































































Reviews: