73
ASUS Terminator 2 barebone system
4.3
Jumper
Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in
CMOS. You can clear the CMOS memory of date, time, and system
setup parameters by erasing the CMOS RTC RAM data. The RAM
data in CMOS, which include system setup information such as
system passwords, is powered by the onboard button cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the
cap on pins 2-3 for about 5-10 seconds, then move the cap back
to pins 1-2.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC
jumper default position. Removing the cap will cause system boot
failure.
P4R8T
®
P4R8T Clear RTC RAM
CLRTC
Normal
Clear CMOS
(Default)
1 2
2 3
Summary of Contents for T2-R - Terminator - Deluxe
Page 1: ...Barebone System Model T2 R Terminator 2 User Guide MODE ...
Page 70: ...70 Chapter 3 Starting up ...
Page 116: ...116 Chapter 5 BIOS setup ...
Page 120: ...A 4 Appendix ...
