Asus T2-R - Terminator - Deluxe User Manual Download

Page: 35 / 120

ASUS Terminator 2 barebone system

2.9

Installing a hard disk drive

The system supports one UltraATA133 IDE hard disk drive (HDD).

To install a hard disk drive:

Locate the HDD tray lock screw
on the other side of the chassis.

Remove the lock screw with a
Philips screw driver. Keep the
screw for later use.

Place a hard disk drive on the
tray with its bottom on the open
side. Align the HDD and HDD
tray screw holes.

Secure the HDD with four
screws.

Slide the HDD tray outward until
its slots are released from the
chassis hooks.

Tray locks

Configure your hard disk drive as Master device before connecting the
IDE cable and power plug. Refer to the HDD documentation on how to
set the drive as a Master device.

Lock slots

Summary of Contents for T2-R - Terminator - Deluxe

























































































































Search results

Summary of Contents for T2-R - Terminator - Deluxe

Reviews:

Related manuals for T2-R - Terminator - Deluxe

Brands by name

Popular brands

Asus T2-R - Terminator - Deluxe, User Manual

Search results

Summary of Contents for T2-R - Terminator - Deluxe

Reviews:

Related manuals for T2-R - Terminator - Deluxe

Brands by name

Popular brands