5 - 2 0
5 - 2 0
5 - 2 0
5 - 2 0
5 - 2 0
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
Northbridge Configuration
Northbridge Configuration
Northbridge Configuration
Northbridge Configuration
Northbridge Configuration
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Select which graphics
controller to use as
primary boot device.
Memory Reference Code (MRC) Version 5.1
Boot Graphics Adapter Priority
[PEG/IGD]
UMA Frame Buffer size
[64 MB]
Surround View Function
[Disabled]
DDR Voltage
[2.65V]
Memory Timing
[Auto]
Boot Graphics Adapter Priority [PEG/IGD]
Allows selection of the graphics controller to use as a primary boot
device. Configuration options: [IGD] [PEG/IGD] [PCI/IGD]
UMA Frame Buffer Size [64 MB]
Sets the UMA frame buffer size
Configuration options: [32 MB] [64 MB] [128 MB]
DDR Voltage [2.65V]
Allows you to manually set the memory voltage.
Configuration options: [2.94V] [2.85V] [2.73V] [2.65V]
Memory Timing [Auto]
Allows you to set the memory timing manually, or allows the BIOS to
configure it automatically. Configuration options: [Auto] [Manual]
The following items appear if the M e m o r y T i m i n g
M e m o r y T i m i n g
M e m o r y T i m i n g
M e m o r y T i m i n g
M e m o r y T i m i n g item is set to
[Manual].
C A S T i m i n g [ D i s a b l e d ]
C A S T i m i n g [ D i s a b l e d ]
C A S T i m i n g [ D i s a b l e d ]
C A S T i m i n g [ D i s a b l e d ]
C A S T i m i n g [ D i s a b l e d ]
Configuration options: [Disabled] [1 Clock] [1.5 Clocks] [2 Clocks]
[2.5 Clocks] [3 Clocks] [3.5 Clocks] [4 Clocks]
C y c l e T i m e ( T R A S ) [ 8 C L O C K S ]
C y c l e T i m e ( T R A S ) [ 8 C L O C K S ]
C y c l e T i m e ( T R A S ) [ 8 C L O C K S ]
C y c l e T i m e ( T R A S ) [ 8 C L O C K S ]
C y c l e T i m e ( T R A S ) [ 8 C L O C K S ]
Allows you to set the cycle time. Use the <+> or <-> key to set the
value. Valid values: [0 CLOCK] [2 CLOCKS] [3 CLOCKS]...
[8 CLOCKS]
