Asus SABERTOOTH Z97 MARK 1 Manual Download Page 106

Page: 106 / 174

3-38

Chapter 3: BIOS setup

Chapter 3

3.6.5

USB Configuration

The items in this menu allow you to change the USB-related features.

The

Mass Storage Devices

item shows the auto-detected values. If no USB device is

detected, the item shows

None

Legacy USB Support [Enabled]

[Enabled]

Your system supports the USB devices in legacy operating systems.

[Disabled]

Your USB devices can be used for BIOS setup only and cannot be

recognized in the boot devices list.

[Auto]

Your system automatically detects the presence of USB devices at startup.

If any USB devices are detected, the legacy USB support is enabled.

Intel xHCI Mode [Smart Auto]

[Auto]

The xHCI is automatically enabled and runs at USB 3.0 mode when the

xHCI driver is installed in the operating system.

[Smart Auto]

Upon detection, the xHCI driver supports the USB 3.0 mode during both

POST and operating system.

[Enabled]

Enables the xHCI controller.

[Disabled]

Disables the xHCI controller.

EHCI Hand-off [Disabled]

[Enabled]

Enables the support for operating systems without an EHCI hand-off

feature.

[Disabled]

Disables the EHCI Hand-off support.

Summary of Contents for SABERTOOTH Z97 MARK 1















































































































































































Search results

Summary of Contents for SABERTOOTH Z97 MARK 1

Reviews:

Related manuals for SABERTOOTH Z97 MARK 1

Brands by name

Popular brands

Asus SABERTOOTH Z97 MARK 1, Manual

Search results

Summary of Contents for SABERTOOTH Z97 MARK 1

Reviews:

Related manuals for SABERTOOTH Z97 MARK 1

Brands by name

Popular brands