Asus SABERTOOTH Z97 MARK 1 Manual Download Page 47

Page: 47 / 174

ASUS SABERTOOTH Z97 MARK 1

1-33

Chapter 1

CPU, optional, chassis, and assistant fan connectors (4-pin CPU_FAN; 4-pin

CPU_OPT; 4-pin CHA_FAN1-4; 3-pin ASST_FAN1-2, 4-pin ASST_FAN3)

Connect the fan cables to the fan connectors on the motherboard.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air

flow inside the system may damage the motherboard components. These are not

jumpers! Do not place jumper caps on the fan connectors!

•

Ensure that the CPU FAN cable is securely installed to the CPU fan connector.

•

The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.

•

The CPU_FAN, CHA_FAN and ASST_FAN connectors support the TUF Thermal

Radar 2 feature.

•

To fully use the fan control function, ensure that you connect only an assistant fan to

the ASST_FAN connectors.

Summary of Contents for SABERTOOTH Z97 MARK 1















































































































































































Search results

Summary of Contents for SABERTOOTH Z97 MARK 1

Reviews:

Related manuals for SABERTOOTH Z97 MARK 1

Brands by name

Popular brands

Asus SABERTOOTH Z97 MARK 1, Manual

Search results

Summary of Contents for SABERTOOTH Z97 MARK 1

Reviews:

Related manuals for SABERTOOTH Z97 MARK 1

Brands by name

Popular brands