Asus RT-N11, Quick Start Manual

Page: 10 / 145

RT-N11 EZ Wireless N Router Quick Start Guide
9
PPTP or L2TP user
If you are using PPTP services, select ADSL
connection that requires username,
password and IP address. Fill in the
username and password provided by
your ISP into the fields. Click Next to
continue. For L2TP users, follow the same
instructions above.
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select ADSL
or other connection type that uses static
IP address . Key in the IP address, subnet
mask, and default gateway provided by your
ISP. You can specify DNS servers, or get
DNS information automatically.
3. After the connection type setting
is completed, set up your wireless
interface. Specify to your wireless
router an SSID (Service Set Identifier),
which is a unique identifier attached to
packets sent over WLAN. This identifier
emulates a password when a device
attempts to communicate with your
wireless router via WLAN.
If you want to protect transmitted data, select any of the Security Level below to enable
encryption methods:
Medium: Only users with the same WEP key settings can connect to your wireless router and
transmit data using 64bits or 128bits WEP key encryption. Configure the settings as Open
System/WEP instead of Shared Key/WEP.
High: Only users with the same WPA pre-shared key settings can connect to your wireless
router and transmit data using TKIP encryption.