Asus RT-AC1900 Dual Band User Manual Download

Page: 85 / 129

5 Utilities

NOTES:

• Download and install the wireless router's utilities from the ASUS

website:

• Device Discovery v1.4.7.1 at http://dlcdnet.asus.com/pub/ASUS/

LiveUpdate/Release/Wireless/Discovery.zip

• Firmware Restoration v1.9.0.4 at http://dlcdnet.asus.com/pub/

ASUS/LiveUpdate/Release/Wireless/Rescue.zip

• Windows Printer Utility v1.0.5.5 at http://dlcdnet.asus.com/pub/

ASUS/LiveUpdate/Release/Wireless/Printer.zip

• The utilities are not supported on MAC OS.

5.1 Device Discovery

Device Discovery is an ASUS WLAN utility that detects an ASUS
wireless router device, and allows you to configure the wireless
networking settings.

To launch the Device Discovery utility:
• From your computer’s desktop, click

Start > All Programs > ASUS Utility > RT-AC1900 Wireless

Router > Device Discovery.

RT-AC68HP

NOTE: When you set the router to Access Point mode, you need to use

Device Discovery to get the router’s IP address.

Summary of Contents for RT-AC1900 Dual Band


































































































































Search results

Summary of Contents for RT-AC1900 Dual Band

Reviews:

Related manuals for RT-AC1900 Dual Band

Brands by name

Popular brands

Asus RT-AC1900 Dual Band, User Manual

Search results

Summary of Contents for RT-AC1900 Dual Band

Reviews:

Related manuals for RT-AC1900 Dual Band

Brands by name

Popular brands