Asus RT-AC1900 Dual Band User Manual Download

Page: 87 / 129

3. Set a static IP on your computer and use the following to set up

your TCP/IP settings:

  IP address: 192.168.1.x
  Subnet mask: 255.255.255.0
4.  From your computer’s desktop, click

Start > All Programs > ASUS Utility RT-AC1900 Wireless

Router > Firmware Restoration.

5. Specify a firmware file, then click Upload.

NOTE: This is not a firmware upgrade utility and cannot be used on

a working ASUS Wireless Router. Normal firmware upgrades must be

done through the web interface. Refer to Chapter 4: Configuring the

Advanced Settings for more details.

5.3 Setting up your printer server

5.3.1 ASUS EZ Printer Sharing

ASUS EZ Printing Sharing utility allows you to connect a USB
printer to your wireless router’s USB port and set up the print
server. This allows your network clients to print and scan files
wirelessly.

Summary of Contents for RT-AC1900 Dual Band


































































































































Search results

Summary of Contents for RT-AC1900 Dual Band

Reviews:

Related manuals for RT-AC1900 Dual Band

Brands by name

Popular brands

Asus RT-AC1900 Dual Band, User Manual

Search results

Summary of Contents for RT-AC1900 Dual Band

Reviews:

Related manuals for RT-AC1900 Dual Band

Brands by name

Popular brands