Asus RS700-X7 RS8 User Manual Download

Page: 41 / 188

2-21

ASUS RS720-X7/RS8

2.8.3

Installing ASUS PIKE RAID card (optional)

Follow the steps below to install an optional ASUS RAID card on your motherboard.

1. Remove the data cables connected

to the SATA connectors on the

motherboard.

2. Locate the PIKE RAID card slot on

the motherboard, then remove the

screw beside the PIKE slot.

3. Align the golden fingers of the

RAID card with the PIKE RAID card

slot then insert the RAID card into

the PIKE RAID card slot. Ensure

that it is completely seated in place,

then secure the PIKE card with the

screw you removed earlier.

4. Connect the data cables in

numerical order, from SATA1-

4 to the SAS connectors

labeled PSAS1-4 (Blue) on the

motherboard.

Summary of Contents for RS700-X7 RS8





























































































































































































Search results

Summary of Contents for RS700-X7 RS8

Reviews:

Related manuals for RS700-X7 RS8

Brands by name

Popular brands

Asus RS700-X7 RS8, User Manual

Search results

Summary of Contents for RS700-X7 RS8

Reviews:

Related manuals for RS700-X7 RS8

Brands by name

Popular brands