Asus RS700-X7 RS8 Page 167 User Manual Download

Page: 167 / 188

ASUS RS720-X7/RS8

7-15

7.2

Intel

chipset device software

installation

This section provides the instructions on how to install the Intel

chipset device

software on the system.
You need to manually install the Intel

chipset device software on a Windows

operating system.
To install the Intel

chipset device software:

1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the item

Intel Chipset Device Software

from the menu.

4. The

Intel(R) Chipset Device Software

window appears. Click

Next

to start

installation.

Summary of Contents for RS700-X7 RS8





























































































































































































Search results

Summary of Contents for RS700-X7 RS8

Reviews:

Related manuals for RS700-X7 RS8

Brands by name

Popular brands

Asus RS700-X7 RS8, User Manual

Search results

Summary of Contents for RS700-X7 RS8

Reviews:

Related manuals for RS700-X7 RS8

Brands by name

Popular brands